NCMA Concrete Masonry and SRW Sales Survey

Please take a few moments to answer this survey of the North American concrete masonry and SRW industry. All responses will be handled in strictest confidence by Industry Insights (3rd party company). For your participation, you will receive a free electronic copy of the industry report.

This survey is for manufacturers of block and/or segmental retaining wall products and SRW licensors (not for dealers or distributors).

  • Respond based on 2018 and 2019 sales from all company divisions/affiliate companies in the United States and/or Canada.
  • If you do not produce one of the products categories please just say so during the survey.
  • No one at NCMA or any industry member or anyone other than selected Industry Insights company representatives will have access to individual firm’s confidential information.
  • After completion, make a copy for your files.
  • If you prefer, you may FAX (614-389-3816), mail (6235 Emerald Parkway Dublin, OH 43016),  or email the survey to Industry Insights.
  • If you have any questions, please contact Michael Becher, CPA, Vice President of Industry Insights at 614-389-2100 x 114 or mbecher@industryinsights.com
  Which best describes your company?
 
  Do you manufacture SRW units?
 
  At how many plant locations did your company manufacture segmental retaining wall units in 2018 and 2019 per region?
 
  # of Plants
Region Map Regions 2018 2019
Region 1: 
#
#
Region 2: 
#
#
Region 3: 
#
#
Region 4: 
#
#
Region 5: 
#
#
Region 6: 
#
#
  Total: 
#
#
  Please indicate your 2018 and 2019 SRW sales in the U.S. and Canada in WALL FACE area for the following product categories:
  We are requesting the square feet of WALL FACE for the following product types; not units. Wall face is calculated by multiplying the height of the SRW (in inches) by its width (in inches) and then converting the calculated area to square feet (144 square inches per square feet - see figure below for a visual depiction of the unit dimensions needed). As an example, if a company sold 10,000 8 inches by 18 inches SRW units, it would convert to square feet of wall face as follows:

8 inches x 18 inches ÷ 144 square inches per square foot = 1 square feet of wall face per unit
1 square feet of wall face per unit x 10,000 units = 10,000 square feet of wall face
 
 
U.S. Sales Canadian Sales
Product 2018 2019 2018 2019
DOT or GRS quality products
(sq. ft. of wall face)
sf
sf
sf
sf
8 in. height SRWs
(sq. ft. of wall face)
sf
sf
sf
sf
6 in. height SRWs
(sq. ft. of wall face)
sf
sf
sf
sf
"Boundary" walls (non-earth-retaining)
(sq. ft. of wall face)
sf
sf
sf
sf
All Others
(sq. ft. of wall face)
sf
sf
sf
sf
Total (calculated): (=100% of product)
(sq. ft. of wall face)
sf
sf
sf
sf
  What estimated percentage of SRW units sales were made in each of the following geographic regions?
 
Region Map Region % of sales
Region 1
%
Region 2
%
Region 3
%
Region 4
%
Region 5
%
Region 6
%
Total
%
  Do you manufacture Concrete Masonry Units?
 
  At how many plant locations did your company manufacture concrete block or concrete masonry veneer units in 2018 and 2019 per region?
 
  # of Plants
Region Map Regions 2018 2019
Region 1: 
#
#
Region 2: 
#
#
Region 3: 
#
#
Region 4: 
#
#
Region 5: 
#
#
Region 6: 
#
#
Total: 
#
#
  Please indicate your 2018 and 2019 concrete masonry sales in the U.S. and Canada in number of units for the following product categories:
 
U.S. Sales Canadian Sales
Product 2018 2019 2018 2019
Gray Block  
(# of units)
Includes 4 in. nominal blocks
#
#
#
#
Structural Architectural Block  
(# of units)
Excludes 4 in. nominal blocks
#
#
#
#
Anchored Concrete Masonry Veneer  
(# of units)
Includes 4 in. nominal blocks
#
#
#
#
Adhered Concrete Masonry Veneer
(sq. ft.)
Do not include wet-cast products
sf
sf
sf
sf
  What estimated percentage of concrete masonry units sales were made on each of the following geographic regions?
 
Region Map Region % of sales
Region 1
%
Region 2
%
Region 3
%
Region 4
%
Region 5
%
Region 6
%
Total
%
  Contact Information (required)
Note – this information will not be reported or shared.  It used for internal purposes only to ensure that only one response is received per company and for delivery of a copy of the final report.
Name:
Email:
Company:
Address:
City:
State/Province:
Zip/Postal Code:
Phone: